If you are starting to see condensation on your windows set your SmartVent digital controller to Max Temp 35ºC, Min Temp 5ºC and Fan Speed High.
If you have the summer feature kit fitted to your SmartVent set the Max Temp to 21ºC then check your controller is set to outside vent.
Choose normal for heat transfer mode and set the comfort level to 21ºC for the heat source room. Any time the temperature of the heat source room rises above the set temperature the heat transfer function will turn on.
This will recycle inside air around the home. Only available with the heat transfer kit and is used where at times the fresh air sources are damper than your indoor air.
For SmartVent user guides and self help videos visit www.smartvent.co.nz/resources. To see more FAQs visit www.climateathome.nz/faq-ventilation.
Find the user manuals here www.smartvent.co.nz/resources. for instructions on how to use your wall, digital or touch screen controller.
All Smartvent systems are supported by a 5 year warranty.
Contact SmartVent on 0800 140 150.
Ensure connection between touchscreen controller and ceiling controller is correct and secure, and cable is not damaged.
Clock error. Change the time on the touch screen controller.
Outside sensor com failure. Ensure connection between sensor and ceiling controller is secure, and cable is not damaged.
Roof sensor com failure. Ensure connection between sensor and ceiling controller is secure, and cable is not damaged.
Lounge sensor com failure. Ensure connection between sensor and ceiling controller is secure, and cable is not damaged.
Bedroom sensor com failure. Ensure connection between sensor and ceiling controller is secure, and cable is not damaged.
Supply fan not running. Phone 09 259 1662 for assistance.
Extract fan not running. Phone 09 259 1662 for assistance.
Control PCB 24 V fuse (FS1) failure. Phone 09 259 1662 for assistance.
Temperature sensor T1 (supply) faulty. Phone 09 259 1662 for assistance.
Temperature sensor T2 (extract) faulty. Phone 09 259 1662 for assistance.
Wired Remote Control failure. Phone 09 259 1662 for assistance.